In the most sensitive moments of the beginning of life, where seconds are worth saving, the presence of accurate and reliable equipment is vital. The Lyona I2101WPRO neonatal resuscitation bed, with its modern design, robust structure and smart technology, is the answer to this vital need in maternity, NICU and neonatal emergency departments.
The body of this bed is made of 3 mm thick ST37 steel sheet and 50×30×2 base profile, which ensures high strength, stability and durability. The body surface is coated with electrostatic powder paint to be resistant to moisture, scratches and disinfectants. The bed design is made of ABS and a warmer cover made of the same material is installed on the upper part to provide beauty, easy cleaning and long durability. This bed is equipped with a powerful ceramic heater that provides uniform and safe heat across the entire surface of the bed. For precise temperature control, the device's intelligent system works in three functional modes: Baby, Manual and Prewarm.
In Baby mode, the skin sensor monitors the baby's body temperature in real time, and if the temperature rises too high, the alarm system is activated to prevent any possible damage. In addition, the internal cooling fan in the warmer section ensures proper air ventilation and maintains the stability of the device's operation for long hours. The height of the warmer relative to the bed base is 760 mm with a tolerance of ±10 and is designed to rotate to the sides so that imaging operations can be performed without the need to move the baby during radiological imaging. The bed also has a special mattress that can transmit radiographic radiation so that the imaging process can be performed while maintaining the baby's position.
To increase safety, transparent butterfly shields are installed on both sides of the bed that can be easily opened and closed, and in addition to preventing falls, they enable the nurse to quickly access the baby. In this section, a precise height gauge is installed with plastic holders, and there is protective foam on the upper part of the device to prevent the user's head from suddenly coming into contact with the warmer during operation. The bed's mechanical system allows for the adjustment of the bed angle and the overall height of the device using a smooth and precise gas spring to create the best possible position for both the baby and the nurse. 125 mm wheels with single locks make it possible to move the bed easily, and the locking wheels in the front prevent any possible overturning.
On the side of the bed, a curved base and holder for the serum, a monitor and pulse oximeter installation location on both sides of the device, and an oxygen capsule holder are installed at the back of the bed so that all the peripheral equipment required for resuscitation are available to the user. In addition, the presence of an internal suction system and an oxygen flow adjustment flow meter have turned the function of this bed into a complete and independent resuscitation unit. In addition to precise heating and control functions, Lyona I2101WPRO neonatal resuscitation bed also has phototherapy capabilities, which play an effective role in treating neonatal jaundice. A focused examination light is also placed above the bed for quick and accurate examination of the newborn's condition, fully meeting the needs of nurses and doctors in emergency situations.
Features of the Lyona I2101WPRO neonatal resuscitation bed
With timer
With a mattress with radiographic capabilities for holding the newborn
With a temperature increase warning system and a temperature sensor failure warning system
With a set temperature display
With the ability to adjust the bed angle and control by a gas jack
Warmer height to the floor mm10 ± mm760
With butterfly shields (with the ability to open and close) and a height gauge on both sides with plastic holders
With warmer cover and bed made of ABS
With the ability to move and rotate the warmer to the sides during radiology
With protective foam to prevent damage to the user's head
Electrostatic powder paint
With 125 mm single-locking wheels with locking wheels in the front to prevent overturning
With a place for the serum base and a curved serum holder
With phototherapy capability
With stands on both sides of the device to place the monitor and pulse oximeter
Safe working load of the bed up to kg40
Withstands the weight of the newborn Up to 10 kg
Frame made of 37ST sheet mm3
Profile from base 50X30X2 ST37
Overall dimensions of the bed mm 1100×1210 and height adjustment mm0085-0885
With examination light
With ceramic heater to warm the bed and the baby
With a skin sensor to control the baby's body temperature in baby mode
Electric controller with three modes baby-manual-prewarm
With oxygen capsule holder on the back of the bed
With cooling fan built into the warmer section to ventilate the air inside the warmer
With suction system
With output adjustment system and oxygen flowmeter
With bed height adjustment capability
Training on how to use the Leona neonatal resuscitation bed
Experts and nurses can become fully familiar with the features, operation and safety of the device through a dedicated training video so that it can be used with maximum confidence.
Lyona I2100WPRO neonatal resuscitation bed standards
ISO 9001
ISO 13485
EN ISO 15223-1
EN ISO 14971
IEC 60601-1
IEC 60601-2-21
IEC 60601-2-50
IEC 62304
Note: The difference between this model and the Lyona I2100WPRO neonatal resuscitation bed is the ability to adjust the electric height and the suction system.