The Stra 4143.1 recovery stretcher is one of the most durable and practical hospital stretchers for recovery, emergency, operating room and short-term hospitalization. This Stra recovery stretcher with a two-piece and one-piece design has a sturdy body made of ST37 profiles and a reinforced chassis that provides stable and safe performance even in the toughest hospital conditions. The floor surface is made of 0.8 mm thick ST37 sheet and its removable mattress allows for easy cleaning and complete disinfection.
The height of the stretcher can be adjusted smoothly and precisely with a hydraulic jack and changes from 550 to 870 mm so that the medical staff can work with the patient in an ergonomic position and without additional pressure. The backrest angle is also adjusted from 0 to 90 degrees with the help of a gas spring, keeping the patient in the best possible position throughout the recovery process. The full range of movements, including Trend and Reverse Trend up to ±16 degrees, allows for critical situations to be managed and positioning to be performed quickly.
For added safety, the Stra 4143.1 stretcher is equipped with lever side rails that open and close quickly and safely. The 200 mm TENTE wheel system with central and directional locking ensures smooth and stable movement, and the built-in bumpers in the four corners prevent possible damage to equipment and walls. The foldable transport handle also makes it easier to control the stretcher when transferring the patient.
This Stra recovery stretcher has complete accessories such as IV pole holders in four corners, file holders, protective guard around the bed and a special oxygen cylinder compartment on the base cover to fully cover the needs of the recovery and emergency departments. With a weight capacity of 250 kg and a safe working capacity of 170 kg, this product is perfectly suitable for patients with various conditions. The Stra 4143.1 stretcher is manufactured in accordance with international standards ISO 13485, ISO 9001, EN ISO 14971, EN ISO 15223-1 and CE and combines durability, safety and ease of use. This model is an ideal choice for hospitals, clinics and medical centers looking for a professional and reliable stretcher.

Features of Stra Recovery Stretcher Model Stra 4143.1
Two pieces, one breaker
Skeleton made of ST37 25X25 profiles with reinforced chassis
Profile made of 40*40 ST37 and 25*25 ST37 base
Has the ability to adjust the height with hydraulic jack
Trend Revers & Trend degree °1±16
Has lever side rails
Minimum height without mattress is 550 and maximum 870 mm
Backrest position can be determined by gas jack from 0 to 90 degrees
Has the ability to wash and disinfect
Electrostatic powder paint
Has a 200 mm central wheel locking system
Has bumpers in the four corners of the bed
Has a side guard to protect the bed
Has a place for the serum base in the four corners
Has a place for a file
Has a folding carrying handle
Has a place for an oxygen capsule on the base cover
Has a bottom material of st 37 sheet with Thickness 0.8 mm
Has a removable mattress for disinfection
Dimensions of the recovery stretcher model Stra 4143.1
Overall dimensions of the stretcher: 2000×754 (mm)
Overall dimensions of the mattress location: (mm) 630×1770
Trend angle: ±15°
Height change: (mm) 870-550
Back angle: °90 – °0
Wheels: with a diameter of 200 mm, center and direction lock
Load capacity: 250 kg
Net weight of the bed: 112 kg
Safe working capacity: 170 kg
Standards of the recovery stretcher model Stra 4143.1
Accessories of the recovery stretcher Stra 4143.1
Serum bar
ISO 9001
ISO 13485
EN ISO 14971
EN ISO 15223-1
CE